Agomet adhesives are solvent free reactive acrylic systems, i.e. the strength of the adhesive (cohesion) itself is built through chemical reaction. In 2-component types, this process is started by mixing the components thoroughly.

The mixture's low initial viscosity ensures thorough spreading over the surface, an important pre-condition for final adhesion. As the reaction progresses, the viscosity increases, until the adhesive is no longer free-flowing. Once the working time of the mixture is exceeded, it can no longer be applied properly, yet the chemical reaction continues. The final strength of the bonded joint is reached after a number of hours or days, depending on the adhesive used, whereas the assembled parts can be handled earlier.

Agomet adhesives are 2-component solvent-free adhesives that harden very rapidly. Following the addition of an initiator (hardener), the components react with one another, forming a high-strength polymer network within a brief period. Varying the amount of hardener is one method of adjusting the working time of the adhesive without affecting its properties appreciably. Various application techniques can be used depending on the type of adhesive.

Advantage
Choice of simple processing methods at room temperature
Rapid fixing and handling
Good gap-filling properties
Minimal surface preparation
Very high tensile and shear strength
Good heat resistance
Good performance over a wide temperature range
High chemical resistance